Boiler Steel Plate is used for many applications where the pressure inside is significantly higher than atmospheric pressure.More..
First to determine the welding methods, such as hand arc welding, submerged arc welding and tungsten argon arc welding, melting polar gas shielded welding machine, and so on are very many different kinds of Q245R nuclear reactor pressure shell steel welding method, can only be chosen according to specific situation, determine the welding method, and make welding process parameters, different kinds of welding process parameters, such as manual welding mainly includes: electrode model (or brand) diameter, current, voltage, welding power source type and polarity connection, welding layer number, number, inspection method, etc.
P355NL1 steel tensile strength Rm:630-450MPa.If high demands are made on notch impact strength and aging resistance. It is mainly used in steam boiler and pressure vessel construction. Q245R nuclear reactor pressure shell steel, P355NL1 plates can be processed with all known welding methods. Welding is possible both with the machine and by hand. Preheating is usually not necessary unless the outside temperature is below 5°C. Then preheating to about 150°C is recommended.
Composition characteristics of Q245R nuclear reactor pressure shell steel product: (1) Low carbon: Due to high requirements for toughness, weldability and cold formability, its carbon content does not exceed 0.20%. 2) Add manganese-based alloying elements. 3) Adding auxiliary elements such as niobium, titanium or vanadium: a small amount of niobium, titanium or vanadium forms fine carbides or carbonitrides in the steel, which is beneficial to obtain fine ferrite grains and improve the strength and toughness of the steel.Previous:EN10204 Certification for Steel 15CrMoR Next:What are the variants of Q245R liquefied